| Accuracy |
: |
± 2% ofthe FSD (Ascending) |
| Migration |
: |
Minor from high to low port |
| Range |
: |
0-0.25 to 0-70 bar or equivalent range in other units |
| First marking on the scale |
: |
20% of the FSD |
| Sensing element |
: |
Piston |
| Wetted parts |
: |
Body material, SS 302 spring, Teflon, & ceramic magnet |
| Case material |
: |
Stainless steel (SS 304) |
| Dial size in inch /mm |
: |
2",2.5",3.5",4",4.5", 6"/50, 63, ao, 100, 115, 150 |
| Mounting |
: |
Direct, front flange & 2" pipe mounting |
| Maximum working pressure |
: |
200/400 bar. 200 bar for Alu, Brass & 400 bar for SS body |
| Maximum process temperature |
: |
8o°c /175° F |
| Body material |
: |
Aluminum, Brass, SS 316 & Monel |
| Seals |
: |
Buna-N, Viton & EPDM '0' rings |
| Window |
: |
Float glass(Std.), toughened glass & acrylic on request. |
| Connection |
: |
1/4" NPT(F) Std. optional 1/4" BSP(F) |
| Porting |
: |
In-line, rear, bottom |
| Over range protection |
: |
Up to the max. working pressure from high & low side |
| Protection for gauge & switch |
: |
IP 65/ NEMA-4 |
Switches (Adjustable in 20·100% of FSD)
• 1 or 2 SPSTs with a DIN plug
• 1 or 2 SPSTs with a terminal strip
• 1 or 2 SPSTs with a built in relay
• 1 or 2 SPDTs with a terminal strip
• 1 or 2 SPDTs with a DIN plug
Options
• Glycerine filling
• Red follower pointer (except 2" & 6")
• Customer logo • Dual scale
• Colour band • Filter mesh in (+) connection
• Reverse port (Pointer moves from right to lett.)
• Descending calibration |
